SOLUTIONS

It's as easy as 1, 2, 3...

PVI Systems offers flexible, turnkey data acquisition solutions that can be configured to best accommodate your sensor and measurement requirements. Simply follow these three steps, and your system will be optimized for your project:
Step 1: Measurement Systems Components
Build a system consisting of one or more of these sensor components
Voltage and IEPE
  • From <1 S/s to over 2 MS/s
  • From , <2μV to 300 Vrms
  • Up to 118dB dynamic range
  • 3 to 32 input channels per module    
Bridge Sensors and Strain Gages
  • ¼, ½, and Full bridge
  • <1 S/s to 102.4 kS/s
  • 0.625 to 10V Excitation Voltage
  • Shunt and Initial Voltage Calibration
  • 4 or 8 Channels per Module    
Current Sensors
  • From <1 S/s to 250 kS/s
  • ±25 mA
  • 300 V Ch-Ch Isolated
  • 4 or 8 Channel Modules
Thermocouples
  • From <1 S/s to 1200 S/s
  • Cold-Junction Compensation
  • Isothermal Terminal Block
  • Types J, K, T, E, N, B, R, and S
  • 4 to 32 Channels per Module    
RTD
  • From <1 S/s to 50 S/s
  • 2-, 3-, or 4-wire RTDs
  • 4 or 20 Channel 
Resistance
  • From <1 S/s to 100 S/s
  • 4-Wire and 2-Wire Resistance, 10 kΩ, 1 kΩ 
Mixed Sensor and Sample Rate Systems: Combine Voltage, IEPE, Bridge, Current, Temperature, or Resistance Modules in one System, with Multiple Sample Rates 

Distributed Systems: Multiple, Time-Synchronized Chassis using MXI, USB, or Ethernet Communication and GPS, IRG, or IEEE-1588 Timing
Step 2: Platform Options
PXI and PXIe With the Option of Adding CompactDAQ Chassis
CompactDAQ: StandAlone, USB, Ethernet
Check out Supported Hardware for more information.
Step 3: Custom Enclosures and Wiring Harnesses
PVI Systems offers multiple levels of integration, from mounting the system in a cabinet, patch panel integration, UPS backups, multiple monitor setups, and more, including:
  • Custom Enclosures
  • Connector Panels
  • Wiring Harnesses
  • Rack Mounted System
  • UPS Backup
  • RAID Arrays
  • Multiple Monitors
  • Shipping Crate